Etched vs printed vs laser engraved

5 min read · Updated October 8, 2026

A stainless steel dinner fork on stone

Etched is a frosted logo cut into glass. Printed is your colors fired onto glass, plates and mugs. Laser engraved is for stainless silverware and bar tools.

Etched

Your logo is cut into the glass. It is one frosted tone, and there is no ink or coating to wear off.

Deep etch is sandcarved and leaves a mark you can feel, for bold logos, rocks glasses and stems. Laser on glass holds thin lines and small type.

A pint glass on a stone counter
Etched: sand cuts the logo into the glass.

Printed

Your colors are fired on in a kiln, so they bond to the surface. We do not use vinyl or labels.

On glass, fired color takes one to three solid colors. On plates and mugs, ceramic decals handle detailed and multicolor logos.

Plates, bowls and mugs can be laser engraved or printed. Glassware can be laser engraved, etched or printed. Silverware is laser engraved.

A speckled stoneware plate on stone
Printed: the logo is fired into the glaze.

Laser engraved

Your logo is laser engraved into stainless steel. It does not wash off or wear away like a print.

We use it on forks, knives, spoons, steak knives, bar blade openers, double jiggers and bar spoons.

Side by side

The short version, by method.

  • Etched. Color: one frosted tone. Look: quiet, formal. Best for: wine glasses, rocks glasses, flutes, coupes. Pieces: glassware.
  • Printed. Color: one to three on glass, full color on ceramic. Look: your brand colors. Best for: pints, events, plates, mugs. Pieces: glassware, plates, bowls, mugs.
  • Laser engraved. Color: one tone in the steel. Look: clean, low key. Best for: steak knives, flatware, bar tools. Pieces: stainless silverware and bar tools.
  • Minimums: 24 pieces per style, 48 for plates and bowls.
  • Lead time: about 3 weeks for glassware and silverware, 4 to 6 weeks for plates and ceramic mugs, from proof approval.

Logo detail tips

Thin lines and tiny text can fill in, especially with deep etch and fired color. Laser on glass is the choice for fine detail.

Small pieces need simple marks. A fork handle, a bar spoon paddle or an espresso cup has little room, so a short wordmark or icon reads best.

On dark glazes, a white version of your logo reads best. On glass, decoration stays out of the top 20 mm.

Upload what you have. We prepare the artwork, flag anything that will not reproduce, and send a proof at true size before anything is made.

Questions

  • Yes. Both mean the logo is cut into the glass. We offer deep etch and laser.